The ECS series offers particularly good value for money, with sensors starting at a price of $6600.

Die ECS-Serie bietet ein besonders gutes Preis-Leistungs-Verhältnis. Die Sensoren sind ab einem Preis von 6.600 US-Dollar erhältlich.

The data sheets for our products are linked via the item number in the tabular overview of our products in the product finder:

You can find our AT SolutionPackage in the download area on our website:

A network card that supports at least Gigabit Ethernet is required to operate the devices. A separate network port is recommended for each connected camera. The CPU and graphics card requirements depend on the application and are therefore specified by the image processing software used.

The electrical installation differs between cameras, compact sensors, and modular compact sensors. It is important to observe the specific information for the respective model to avoid damage to the device. We recommend using our IO panel.

Profile recording can be synchronized by an external encoder signal. The encoder is specified for TTL levels and should not have signal levels above 5V DC, as higher voltages can damage the device.

Instead of extending the frame, you can split the recording into multiple frames without any loss of data. With the FrameBurstStart trigger, you can trigger multiple frames with a single start signal.

The C6 series has two digital inputs and two digital outputs that can be connected to a PLC.

The term “smart sensor” generally refers to the evaluation of measurement data within the device itself. These sensors only transmit the results via their communication interfaces (e.g., Ethernet, Profinet, Modbus, or MQTT). AT’s 3D sensors, on the other hand, transmit the profile data to a PC via the GigE Vision interface. The data is then processed on the PC. AT 3D sensors are high-resolution, high-speed profile sensors. The amount of data generated by such sensors usually exceeds the performance capabilities of the CPUs built into cameras.

All CS, MCS and XCS series products are covered by a 2-year warranty, but the warranty for ECS products is only 1 year.

With our 25 years of expertise as component manufacturers in the field of 3D image processing, we have comprehensive knowledge in 3D laser triangulation sensor applications. Therefore, we can offer you optimal advice on which sensor is best for your application. Feel free to reach out to our sales team with confidence: [email protected].

You can find a summary of our quick start guides on our website.

No, our devices do not support PoE and may be damaged if connected to PoE.